欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

To know carbide milling cutters, it is important to know what carbide is. carbide is a powder metallurgy product made by sintering micro-powders of carbides (such as WC and TiC) of refractory metals with high hardness, using cobalt (Co) or nickel (Ni) and molybdenum (Mo) as binders in a vacuum furnace or hydrogen reduction furnace.

 

Selection of carbide milling cutter materials

Except for end mills and some face mills, which use carbide?as the tool material, other types of milling cutters mostly use high-speed steel, especially tungsten-molybdenum series and high-vanadium high-speed steel, which have good performance. The tool durability can be improved by 1 to 2 times compared with W18Cr4V. The Chinese carbide?grades suitable for making milling cutters include YG8, YW2, YS2T, YS30, YS25, etc. Friends who are not familiar with Chinese grades can check the corresponding table between Chinese carbide?grades and international grades.

 

Classification of milling cutters.

Cylindrical? milling cutters

They are used for machining surfaces on horizontal milling machines. The teeth are distributed on the circumference of tool and are divided into straight teeth and spiral teeth according to their shapes. According to the number of teeth, they are divided into coarse teeth and fine teeth. Spiral coarse-tooth milling cutters have fewer teeth, high tooth strength, and large chip space, and are suitable for rough machining. Fine-tooth milling cutters are suitable for precision machining.

cylindrical milling cutter

Face milling cutter

It’s used for machining surfaces, end faces, and circumferences on vertical milling machines, end milling machines, or gantry milling machines. There are teeth on both the end face and circumference, and they can be divided into coarse teeth and fine teeth. Its structure includes three types: integral type, insert type, and indexable type.

6 Types of milling cutters and To-knows about them 1

End milling cutter

It’s used for machining grooves and stepped surfaces, etc. The teeth are on both the circumference and end face, and the tool cannot be fed axially during operation. When there is an end tooth passing through the center of the vertical type cutter, axial feeding is possible.

carbide mill cutter

Three-edge milling cutter

It’s used for machining various grooves and stepped surfaces, with teeth on both sides and circumference.

6 Types of milling cutters and To-knows about them 2

Chamfer milling cutter

It’s used for milling grooves at a certain angle, with two types of single-angle and double-angle milling cutters.

6 Types of milling cutters and To-knows about them 3

Saw blade milling cutter

It’s used for machining deep grooves and cutting workpieces, with more teeth on the circumference. In order to reduce friction during milling, there is a secondary relief angle of 15’~1° on both sides of the teeth. In addition, there are keyway type cutters, dovetail slot cutters, T-slot cutters, and various shaping milling cutters.

6 Types of milling cutters and To-knows about them 4

Main milling methods

There are two main types of milling methods for milling cutters in relation to the feed direction of the workpiece and the rotation direction of milling cutter:

The first is climb milling, in which the rotation direction of the milling cutter and the feed direction of the cutting are the same. When cutting starts, this type of tools bite into the workpiece and cuts the final chips.

The second is conventional milling, in which the rotation direction of the cutter and the feed direction of the cutting are opposite. The tool must slide on the workpiece before cutting starts, with the cutting thickness starting at zero and gradually increasing until the end of cutting.

During climb milling, the cutting force presses the workpiece against the worktable, while during conventional milling, the cutting force lifts the workpiece off the worktable. Since climb milling produces the best cutting effect, it is usually preferred. Only when there is a problem with backlash in the machine tool or when climb milling cannot solve the problem should conventional milling be considered.

For example, when milling stainless steel, climb milling should be used as much as possible. Asymmetric climb milling ensures that the cutting edge smoothly cuts away from the metal, reducing the contact area of the chips. Therefore, climb milling can reduce the occurrence of chipping and edge wear on the front cutting edge, improving the durability of the milling cutter.

Maintenance of? Milling Cutters

When the axis of the milling cutter coincides with or approaches the edge of the workpiece, the situation will be very serious, and the operator should do relevant equipment maintenance work:

1Check the power and stiffness of the machine tool to ensure that the required cutter diameter can be used on the machine tool.

The overhang of the tool on the spindle should be as short as possible to reduce the impact of the position of the cutter axis and the workpiece on the shock load.

2Use the correct cutter tooth pitch suitable for the process to ensure that there are not too many blades engaged with the workpiece at the same time during cutting, and ensure that there are enough blades engaged with the workpiece when milling narrow workpieces or milling cavities.

3Ensure that the feed rate of each blade is adopted so that the correct cutting effect can be obtained when the chip thickness is sufficient, thereby reducing tool wear. Use a positive front angle groove-shaped indexable insert to obtain smooth cutting effects and the lowest power.

4Choose cutter diameter suitable for the width of the workpiece.

5Choose the correct main angle.

6Place the cutter correctly.

7Use cutting fluid only when necessary.

8Follow the rules of tool maintenance and repair, and monitor tool wear.

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *

日本精品久久不卡一区二区| 鸡巴抽插逼逼视频| 留学生美女被大黑屌猛戳| 亚洲乱熟女一区二区三区| 男男大鸡巴操小屁眼视频| 久久99热东京热亲亲热| 国产成人亚洲欧美久久| av人摸人人人澡人人超| 久久久国产精品2020| 看人妻仑乱A级毛片| 亚洲欧美一区二区三区孕妇| 欧美一区二区三区身体| 日本二区在线观看| 性一交一乱一乱一区二区| 欧美人与动人物A级| 欧美成人精品一区二区免费看| 欧美亚洲另类天天综合网| 看人妻仑乱A级毛片| 嗯嗯嗯啊啊啊好湿好痒好多水视频| 裸毛片视频在线视频| 无码人妻免费一区二区三区| 影音先锋亚洲中文综合网| 欧美十八一区二区三区| 日韩精品一区av在线| 国产一国产一级毛片无码视频百度| 精品一区二区久久久久无码| 一区二区三区av精品| 少妇被黑人到高潮喷出白浆| 青青视频在线人视频在线| 午夜性无码视频在线播放| 火辣美女的操大逼| 白色紧身裤无码系列在线| 亚洲欧美中文字幕第二十| 色一情一交一乱一区二区| 老熟妇高潮一区二区高清视频| 久久精品国产亚洲高清| 日韩乱码一区二区三区中文字幕| 国产品无码一区二区三区在线| 伊人久久久久久久久香港| 免费黄片视频星空| 欧美亚洲综合一区二区三区|